Cluster recode

From S4wiki
Revision as of 20:15, 9 April 2013 by Nyet (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

"Recode" is a misnomer: it is not to be confused with cluster coding

It refers to the adaptation value stored in channel 60:

  1. Turn ignition to ON
  2. Startup VAGCOM
  3. Go to:
    • Instruments
    • Adaptation
    • Channel 60 [Read]
  4. Enter value (see table below)
  5. Save
  6. Reread value to verify
  7. Exit VAGCOM
  8. Turn ignition OFF/ON
  9. Clear codes

Cluster adaptation values

ECU software Channel 60 MAF Transmission
A-Box 0 Bosch 6-speed
B-Box tiptronic
H-Box Hitachi 6-speed
J-Box tiptronic
L-Box 1027
M-Box 1025 6-speed
T-Box 1025 6-speed
AA-Box 1027 tiptronic
Retrieved from "http://s4wiki.com/mediawiki/index.php?title=Cluster_recode&oldid=4000"