Tuning: Difference between revisions
Jump to navigation
Jump to search
(→Boost) |
(→Timing) |
||
| Line 24: | Line 24: | ||
* KFTARX - IAT correction for maximum specified load |
* KFTARX - IAT correction for maximum specified load |
||
==Timing== |
==Timing== |
||
* KFZW/ |
* KFZW/KFZW2 - primary timing maps. ME7.1 has a two point variable cam timing system; there is a table for each cam timing state. |
||
==Other niceties== |
==Other niceties== |
||
Revision as of 19:39, 28 April 2009
Getting Started
Things you need
- KWP2000+ OBD cable
- KWP2000+ flashing software
- TunerPro
- XDF file for the revision of ECU you are using. If you wish to use a different version software than your car came with, read this carefully.
- XDF for M-box.
- ECUFix (optional, some kwp flashing software will do checksumming for you)
Fueling
- KRKTE - primary fueling
- KVB - fuel consumption (MPG in cluster)
- MLHFM - compensating for MAF housing diameter
- KFLDBTS - requested lambda for component protection (may require a lower TABGBTS if your MAF is not 100% compensated for in MLHFM)
- LAMFA - requested lambda when below TABGBTS
Boost
- KFMIRL - specified load
- FLKDHBN - maximum requested pressure ratio
- LDRXN - maximum specified load
- KFTARX - IAT correction for maximum specified load
Timing
- KFZW/KFZW2 - primary timing maps. ME7.1 has a two point variable cam timing system; there is a table for each cam timing state.
Other niceties
Speed limiter
- VAVMX/VMAX - Speed limiter
Rev limiter
- NMAX - RPM limit
- NLLM - idle RPM