Tuning: Difference between revisions
Jump to navigation
Jump to search
(New page: ==Getting Started== Things you need # kpw2000+ OBD cable # kwp2000+ flashing software # TunerPro # XDF file for the revision of ECU you are using ==Fueling== KRKTE - primary fueling KV...) |
|||
| Line 10: | Line 10: | ||
==Fueling== |
==Fueling== |
||
KRKTE - primary fueling |
*KRKTE - primary fueling |
||
KVB - fuel consumption (MPG in cluster) |
*KVB - fuel consumption (MPG in cluster) |
||
MLHFM - compensating for MAF housing diameter |
*MLHFM - compensating for MAF housing diameter |
||
KFLDBTS - requested lambda for component protection (may require a lower TABGBTS if your MAF is not 100% compensated for in MLHFM) |
*KFLDBTS - requested lambda for component protection (may require a lower TABGBTS if your MAF is not 100% compensated for in MLHFM) |
||
LAMFA - requested lambda when below TABGBTS |
*LAMFA - requested lambda when below TABGBTS |
||
==Boost== |
==Boost== |
||
Revision as of 04:46, 11 April 2009
Getting Started
Things you need
- kpw2000+ OBD cable
- kwp2000+ flashing software
- TunerPro
- XDF file for the revision of ECU you are using
Fueling
- KRKTE - primary fueling
- KVB - fuel consumption (MPG in cluster)
- MLHFM - compensating for MAF housing diameter
- KFLDBTS - requested lambda for component protection (may require a lower TABGBTS if your MAF is not 100% compensated for in MLHFM)
- LAMFA - requested lambda when below TABGBTS