Long term fuel trim: Difference between revisions

From S4wiki
Jump to navigation Jump to search
No edit summary
 
No edit summary
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
This is the control of Injection Pulse Time Open (ti) (also called Injection Pulse Width) over the entire range
This is the control of Injection Pulse Time Open (ti) (also called Injection Pulse Width) over the entire range of engine operation. It is primarily calculated at idle or low load mid range engine operation and is averaged
over time. In these idle/low load conditions the amount of fuel variation is small due to the relatively small amount of air input. The computer monitors the O2 sensor and adds or subtracts approximately 0.001 msec to the injection pulse time (ti) in order to maintain a Lambda = 1. This amount of increase or decrease of the injection pulse width is known as the Adaptation Value. This is the value output by the ECU when reading the live data stream.
of engine operation. It is primarily calculated at idle or low load mid range engine operation and is averaged

over time.
For example: An LTFT of 1 is the factory spec for a new injector's injection pulse width (time open). This corresponds to an LTFT Adaptation Value of 0.0.
In these idle/low load conditions the amount of fuel variation is small due to the relatively small amount of air

input. The computer monitors the O2 sensor and ADDS or SUBTRACTS approximately 0.001msec to the
An LTFT Adaption Value of 0.100 would indicate a wider injection pulse width. This corresponds to a LTFT of 1.100.
injection pulse time (ti) in order to maintain a Lambda = 1. This amount of increase or decrease of the

injection pulse width is known as the Adaptation Value. This is the value output by the ECU when reading
An LTFT Adaption Value of -0.020 would indicate a narrower injection pulse width. This corresponds to a LTFT of 0.980.
the live data stream.

For example: An LTFT of 1 is the factory spec for a new injector's injection pulse width (time open). This
corresponds to an LTFT Adaptation Value of 0.0.
An LTFT Adaption Value of 0.100 would indicate a wider injection pulse width. This corresponds to a LTFT
of 1.100.
An LTFT Adaption Value of -0.020 would indicate a narrower injection pulse width. This corresponds to a
LTFT of 0.980.
The LTFT is also influenced by the [[Short Term Fuel Trim]] (STFT).
The LTFT is also influenced by the [[Short Term Fuel Trim]] (STFT).

==Notes==
[[LTFT]]s can be monitored via [[VAG-COM]] channel 32.

[[Category:Fueling]]

Latest revision as of 04:20, 13 July 2007

This is the control of Injection Pulse Time Open (ti) (also called Injection Pulse Width) over the entire range of engine operation. It is primarily calculated at idle or low load mid range engine operation and is averaged over time. In these idle/low load conditions the amount of fuel variation is small due to the relatively small amount of air input. The computer monitors the O2 sensor and adds or subtracts approximately 0.001 msec to the injection pulse time (ti) in order to maintain a Lambda = 1. This amount of increase or decrease of the injection pulse width is known as the Adaptation Value. This is the value output by the ECU when reading the live data stream.

For example: An LTFT of 1 is the factory spec for a new injector's injection pulse width (time open). This corresponds to an LTFT Adaptation Value of 0.0.

An LTFT Adaption Value of 0.100 would indicate a wider injection pulse width. This corresponds to a LTFT of 1.100.

An LTFT Adaption Value of -0.020 would indicate a narrower injection pulse width. This corresponds to a LTFT of 0.980.

The LTFT is also influenced by the Short Term Fuel Trim (STFT).

Notes

LTFTs can be monitored via VAG-COM channel 32.