01E 6-speed manual transmission

From S4wiki
Revision as of 19:40, 2 November 2011 by Matt Danger (talk | contribs) (Add trans rebuild kit part numbers)
Jump to navigation Jump to search

Overview

The 01E 6-speed manual transmission came in some B5 S4s, C5 A6s and Allroads

Fluid

Capacity: 3.2L Type: 75-90wt synthetic gear oil

Common Problems

  • Brass synchronizers wear prematurely. These are often replaced with composite synchronizers.
  • Early 01E models (2000-early 2001 B5 S4) were equipped with a 1st and 2nd gear shift collar with a tolerance that is very tight. Because of this any wear will cause the collar to lock up and prevent the transmission from being shift into or out of 1st or 2nd gear. This is commonly replaced with an updated version.

Modifications and Repairs

Rebuild

The JHMotorsports transmission rebuild DVD is very helpful along with the Bentley manual.

Typical rebuild kit parts

Part Number Name
016 311 113 C Input shaft seal
012 301 457 C Shift lever seal
016 409 399 B Front axle seal x 2
01E 409 400 Output shaft seal
01e 301 235 Center case gasket
012 311 255 A Shift collar sleeve
012 311 243 A Shift collar hub
012 311 312 D Synchro spring (6 total)
012 311 295 F Synchronizer (6 total)

Metal slave cylinder upgrade

The OEM plastic slave cylinders can create and leak. The internal pistons can also be overextended and ejected from the cylinder requiring replacement. The metal cylinder does not suffer from these problems.

A metal slave cylinder is made by Sachs part #7372-01060755.[1]

References