Manifold air pressure:Rescale project
Jump to navigation
Jump to search
Variables
From http://nefariousmotorsports.com/forum/index.php?topic=3027
pvdk_w pus_w fvpdkdsl_w fho_w frhodkr_w SDLDSUA axis calculation
Maps
[%BBBO] MSNPCV - Divide axis by 2 [%BGMSZS] KVLAD - Multiply by 2 PSSOLPGRD - Divide by 2 PSSOLNGRD - Divide by 2 PSSOLPF - Divide by 2 [%BGSRM] KISRM - Divide by 2 KFPRG - Divide by 2 KFURL - Multiply by 2 [%DLDUV]* DLDUVES - Divide by 2 [%DLDR] KFDLULS - Divide both axis and table by 2 [%GGDSAS] DPDSVLU - Divide by 2 DSLGRAD - Divide by 2 DSLOFS - Divide by 2 DSUGRAD - Divide by 2 (DSUOFS was zero, otherwise divide by 2) FHOE - Divide by 2 PUE - Divide by 2 PUMN - Divide by 2 PUMX - Divide by 2 PVDKMN - Divide by 2 [%GGLSU] PADMSA - Divide curve by 2 FLAMPA - Divide axis by 2 PUELSU - Divide by 2 [%GGPBKV] PBKVVSTG - Divide both axis and curve by 2 PUEBKV - Divide by 2 [%LDRPID] KFLDIMX - Divide axis by 2 KFLDRQ0 - Divide axis by 2 KFLDRQ1 - Divide axis by 2 KFLDRQ2 - Divide axis by 2 KFLDIOPU - Divide axis by 2 LDEIAO - Divide by 2 LDEIAP - Divide by 2 LDEIAPS - Divide by 2 LDEIAU - Divide by 2 NLDIAPU - Divide axis by 2 [%LDUVST]* KFSDLDSUA - Divide both axis and table by 2 HSLDSUA - Divide by 2 LDUVRS - Divide by 2 [%RKTI] FRLFSDP - Divide axis by 2
Some questionable items
Missing from above, updated later
[%LDRPID] LDRQ0DY - Multiply by 2 LDRQ1DY - Multiply by 2 LDRQ0S - Multiply by 2 LDRQ1ST - Multiply by 2 UMDYLDR - Divide by 2 [%DLDR] DLUL - Divide by 2 EDLDRP - Divide by 2
FHOKH and ZDSU
[%BBKHZ] FHOKH - Divide by two or set to 0 [%GGDSU] ZDSU - Sqrt and multiply by 2
Sqrt and multiply by 2 does different things depending on if ZDSU is >4 or <4
LDEIAP
0xFE/2 is 0xFF (-2 -> -1)
Probably best off to leave it alone, that's at A/D resolution.
VCDS hack
M box ONLY!
0x6A338: change 7D to FA 0x695B0, 0x69416 and 0x6B646: change 7C 84 F1 C8 to EA 00 6E A3 0x69402: change F3 FC 43 8B EA 00 BE E6 to F2 F4 84 A2 EA 00 6E A3
551G dump
ID | Address | Name | Size | Organization | Description | Units | X Units | Y Units | Scale | X Scale | Y Scale | Value min | Value max | Value min*1 | Value max*1 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KFLDIOPU | 0x1970b | Korrektur der TV-Werte durch Höheneinfluß | 8x8 | 8 Bit | - | % | hPa | Upm | 0.64 | 5.0 | 40.0 | 0.0 | 10.88 | 0x0 | 0x11 |
LDEIAO | 0x1978b | Obere Regelabweichungsschwelle für Negativ-Verstellung | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 20.0 | 20.0 | 0x2 | 0x2 |
LDEIAP | 0x1978c | Regelabweichungsschwelle für Positiv Adaption I-Regler | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | -20.0 | -20.0 | 0xfe | 0xfe |
LDEIAPS | 0x1978d | Regelabweichungsschwelle für schnelle Positiv-Nachführung | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 120.0 | 120.0 | 0xc | 0xc |
LDEIAU | 0x1978e | Untere Regelabweichungsschwelle für Negativ-Verstellung | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | -100.0 | -100.0 | 0xf6 | 0xf6 |
NLDIAPU | 0x1979c | Drehzahlschwelle für Adaption I-Begrenzung | 2x1 | 8 Bit | - | Upm | hPa | - | 40.0 | 5.0 | 1.0 | 2160.0 | 2600.0 | 0x36 | 0x41 |
UMDYLDR | 0x197ab | Umschaltschwelle Dynamik LDR | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 100.0 | 100.0 | 0xa | 0xa |
ELDOB | 0x197ac | Regelabweichungsschwelle für Start Zeitzähler LDR-Overboost activ | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 50.0 | 50.0 | 0x5 | 0x5 |
LDPBN | 0x19860 | LDR p-Begrenzung bei zu hoher Motortemperatur | 8x1 | 8 Bit | - | hPa | Upm | - | 10.0 | 40.0 | 1.0 | 1350.0 | 1550.0 | 0x87 | 0x9b |
KFTVLDRE | 0x198d0 | Kennfeld tastverhältnisersatzwert für LDR | 4x8 | 8 Bit | - | % | hPa | Upm | 0.390625 | 10.0 | 40.0 | 10.15625 | 10.15625 | 0x1a | 0x1a |
DLUL | 0x198f3 | Delta-Last für Überladeschutz-Reset | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 20.0 | 20.0 | 0x2 | 0x2 |
EDLDRP | 0x198f4 | Schwelle Regelabweichung für Diagnose LDR-Regelabweichung positiv | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 100.0 | 100.0 | 0xa | 0xa |
KFDLULS | 0x19907 | Delta Druck für Überladeschutzdiagnose | 8x8 | 8 Bit | - | hPa | hPa | Upm | 5.0 | 10.0 | 40.0 | 250.0 | 1000.0 | 0x32 | 0xc8 |
NDLDRAPU | 0x1999c | Drehzahlschwelle für LDRA Fehlerpfad und Heilung LDO Fehlerpfad | 2x1 | 8 Bit | - | Upm | hPa | - | 40.0 | 5.0 | 1.0 | 2520.0 | 3000.0 | 0x3f | 0x4b |
PUDWG | 0x199a7 | pu- Schwelle für Diagnose Waste- Gate | 1x1 | 8 Bit | - | hPa | - | - | 5.0 | 1.0 | 1.0 | 1270.0 | 1270.0 | 0xfe | 0xfe |
DPBKVUS | 0x1a4e6 | gewünschte Druckdifferenz zwischen Bremskraftverstärker und Umgebungsdruck | 1x1 | 8 Bit | - | hPa | - | - | 5.0 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
KFPRG | 0x1bd30 | interner Abgaspartialdruck abhängig von NW-Verstellung bei sumode=0 | 10x6 | 16 Bit (LoHi) | - | hPa | U/min | °KW | 0.0390625 | 0.25 | 0.001953125 | 0.0 | 320.0 | 0x0 | 0x2000 |
KFURL | 0x1bdcc | Umrechnungsfaktor von ps->rl abhängig von NW-Verstellung bei sumode=0 | 10x6 | 16 Bit (LoHi) | - | %/hPa | U/min | °KW | 4.57763671875E-6 | 0.25 | 0.001953125 | 0.0 | 0.123504638671875 | 0x0 | 0x6964 |
DPDSVLU | 0x1be46 | Delta Druckwert für Signalvergleich Ladedruck mit Umgebungsdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 200.0 | 200.0 | 0x1400 | 0x1400 |
DPUPVDK | 0x1be5a | Differenzdruck pu-pvdk | 8x1 | 16 Bit (LoHi) | - | hPa | kg/h | - | 0.0390625 | 0.1 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
DSUGRAD | 0x1be6a | Gradient für Drucksensor Umgebung | 1x1 | 16 Bit (LoHi) | - | hPa/V | - | - | 0.015625 | 1.0 | 1.0 | 253.453125 | 253.453125 | 0x3f5d | 0x3f5d |
DSUOFS | 0x1be6c | Offset Drucksensor Umgebung | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
PUE | 0x1be6e | Ersatzwert für Umgebungsdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 700.0 | 700.0 | 0x4600 | 0x4600 |
PUMN | 0x1be70 | Umgebungsdruckbegrenzung minimal | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 350.0 | 350.0 | 0x2300 | 0x2300 |
PUMX | 0x1be72 | Umgebungsdruckbegrenzung maximal | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1250.0 | 1250.0 | 0x7d00 | 0x7d00 |
PUSPSMX | 0x1be74 | max. Abweichung von Umgebungsdruck und Saugrohrdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 300.0 | 300.0 | 0x1e00 | 0x1e00 |
PVDKMN | 0x1be76 | pvdk min. Schwelle für Fehlererkennung Ladedrucksensor | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 400.0 | 400.0 | 0x2800 | 0x2800 |
PVDKMX | 0x1be82 | Ladedruckgrenze für Diagnose max. Fehler | 4x1 | 16 Bit (LoHi) | - | hPa | U/min | - | 0.0390625 | 0.25 | 1.0 | 1300.0 | 2559.9609375 | 0x8200 | 0xffff |
PVDKPSMX | 0x1be8a | max. Abweichung von Saugrohrdruck und Druck vor Drosselklappe | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 210.0 | 210.0 | 0x1500 | 0x1500 |
KLDPDK | 0x1bfda | Druckabfall über Drosselklappe | 16x1 | 16 Bit (LoHi) | - | hPa | kg/h | - | 0.0390625 | 0.1 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
FRLFSDP | 0x1c2a8 | Einspritzkorrektur bei RLFS | 11x1 | 16 Bit (LoHi) | - | - | hPa | - | 3.0517578125E-5 | 0.078125 | 1.0 | 1.0 | 1.0 | 0x8000 | 0x8000 |
PSAPES | 0x1c2c0 | Saugrohrdruck für Applikation Einspritzung | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1013.0078125 | 1013.0078125 | 0x654d | 0x654d |
KFLDIMX | 0x1d65e | Kennfeld LDR I-Reglerbegrenzung | 8x16 | 16 Bit (LoHi) | - | % | hPa | U/min | 0.0050 | 0.0390625 | 0.25 | 0.0 | 95.0 | 0x0 | 0x4a38 |
KFLDRQ2 | 0x1d8f0 | Kennfeld LDR-Reglerparameter Q2 | 4x8 | 16 Bit (LoHi) | - | %/100hPa | hPa | Upm | 0.05 | 10.0 | 40.0 | 0.0 | 25.0 | 0x0 | 0x1f4 |
LDRQ0DY | 0x1d95a | LDR-Reglerparameter Q0 | 16x1 | 16 Bit (LoHi) | - | %/100hPa | Upm | - | 0.05 | 40.0 | 1.0 | 5.0 | 30.0 | 0x64 | 0x258 |
LDRQ0S | 0x1d97a | Reglerparameter Q0 LDR-PID Regler im Stationärbetrieb | 1x1 | 16 Bit (LoHi) | - | %/100hPa | - | - | 0.05 | 1.0 | 1.0 | 2.0 | 2.0 | 0x28 | 0x28 |
LDRQ1DY | 0x1d97c | Reglerparameter Q1 PID-Regler im Dynamikbetrieb (Integrationsbeiwert) | 16x1 | 16 Bit (LoHi) | - | %/100hPa | Upm | - | 0.05 | 40.0 | 1.0 | 20.0 | 20.0 | 0x190 | 0x190 |
LDRQ1ST | 0x1d99c | Reglerparameter Q1 PID-Regler im Stationärbetrieb (Integrationsbeiwert) | 16x1 | 16 Bit (LoHi) | - | %/100hPa | Upm | - | 0.05 | 40.0 | 1.0 | 0.30000000000000004 | 0.5 | 0x6 | 0xa |
DPVRDKMN | 0x1ddc4 | Relativer Delta- Druck vor DK für Diagnose Waste- Gate | 4x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 7.8125 | 7.8125 | 0xc8 | 0xc8 |
FQTEPT | 0x1eb99 | Kennlinie Tankunterdruckbegrenzung (pte) | 6x1 | 8 Bit | - | - | hPa | - | 0.125 | 0.25 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
KFFLTA | 0x1ec54 | Schwelle zur Erkennung Feinleck | 4x4 | 8 Bit | - | s | hPa | Grad C | 0.05 | 0.0390625 | 0.75 | 2.4000000000000004 | 2.95 | 0x30 | 0x3b |
KFGLTA | 0x1ec72 | Schwelle zur Erkennung Grobleck | 4x4 | 8 Bit | - | s | hPa | Grad C | 0.05 | 0.0390625 | 0.75 | 0.9500000000000001 | 1.1500000000000001 | 0x13 | 0x17 |
KFXFTA | 0x1ec90 | Schwelle zur Erkennung Feinstleck (>= 0.5 mm) | 4x4 | 8 Bit | - | s | hPa | Grad C | 0.05 | 0.0390625 | 0.75 | 5.9 | 7.0 | 0x76 | 0x8c |
PUKORRV | 0x1ecbc | Umgebungsdruckkorrektur abhängig von Fahrzeuggeschwindigkeit | 8x1 | 16 Bit (LoHi) | - | hPa | km/h | - | 0.0390625 | 0.0078125 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
DSBOFS | 0x1f37e | Offset Drucksensor Bremskraftverstärker | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 110.0 | 110.0 | 0xb00 | 0xb00 |
PBKVVSTG[PV] | 0x1f3a2 | Unterdruckverstärkung durch Saugstrahleffekt | 6x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 0.0 | 170.0 | 0x0 | 0x1100 |
PUEBKV | 0x1f3ae | Ersatzwert für Umgebungsdruck für BKV | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 600.0 | 600.0 | 0x3c00 | 0x3c00 |
DPBKVSPS | 0x1f3b4 | Delta Druck zw. Sollbremskraftverstärkerdruck und Saugrohrdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 70.0 | 70.0 | 0x700 | 0x700 |
DPBKVUKKPU | 0x1f3c0 | min. zuläs. Druckdiff. zw. pbkv und pu für Kompressorabschaltung | 4x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
DPBKVUKNW | 0x1f3d2 | min. zuläs. Druckdiff. zw. pbkv und pu für NW-Umschaltung auf min. Überschneidun | 4x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 220.0 | 300.0 | 0x1600 | 0x1e00 |
DPBKVUKP | 0x1f3e4 | min. zuläs. Druckdif. zwischen BKV-Druck und pu für Pumpenansteuerung | 4x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 240.0 | 400.0 | 0x1800 | 0x2800 |
DPBKVUKPU | 0x1f3f6 | min. zuläs. Druckdif. zw. BKV-Druck und pu ohne Betät. der Bremse abh. von pu | 4x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 0.0390625 | 0.0390625 | 1.0 | 220.0 | 300.0 | 0x1600 | 0x1e00 |
OPBKVUKKB | 0x1f42a | Offset zu DPBKVUKKPU bei betätigter Bremse | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
OPBKVUKNWB | 0x1f42c | Offset zu DPBKVUKNW bei betätigter Bremse | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
OPBKVUKPB | 0x1f42e | Offset zu DPBKVUKP bei betätigter Bremse | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
OPBKVUKPUB | 0x1f430 | Offset zu DPBKVUKPU bei betätigter Bremse | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
PBKVKREHY | 0x1f432 | Hysterese zur kritischen Obergrenze für Druck im BKV für Ersatzmaßnahmen | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 50.0 | 50.0 | 0x500 | 0x500 |
PBKVKRHY | 0x1f434 | Hysterese zur kritischen Obergrenze für Druck im Bremskraftverstärker | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 170.0 | 170.0 | 0x1100 | 0x1100 |
DPBKVP | 0x1f438 | Druckdelta, das in der Zeit TDDBKVP evakuiert werden kann | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 25.0 | 25.0 | 0x280 | 0x280 |
DPBKVPMN | 0x1f43a | Toleranz von pubkv_w*FBKVP (min. Pump-Druck) und Toleranz Drucksensor im BKV | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 60.0 | 60.0 | 0x600 | 0x600 |
DPBKVLE | 0x1f440 | zulässiger Druckanstieg bei Leckage | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1278.984375 | 1278.984375 | 0x7fe6 | 0x7fe6 |
DPSBKV | 0x1f442 | Delta Druck für Plausibilität von Bremskraftverstärkerdruck mit Saugrohrdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 250.0 | 250.0 | 0x1900 | 0x1900 |
DPSPBKVNPH | 0x1f444 | min. Druckdifferenz zw. ps und pbkv für Heilung npl-Fehler(Leckage) | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | -1280.0 | -1280.0 | 0x8000 | 0x8000 |
DPUBKV | 0x1f446 | Delta Druck für Plaus. von Bremskraftverstärkerdruck mit Umgebungsdruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 2550.0 | 2550.0 | 0xff00 | 0xff00 |
PBKVMN | 0x1f448 | min. möglicher Druck im Bremskraftverstärker | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 100.0 | 100.0 | 0xa00 | 0xa00 |
PBKVMX | 0x1f44a | max. möglicher Druck im Bremskraftverstärker | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1190.0 | 1190.0 | 0x7700 | 0x7700 |
SLD04LDUB | 0x10070 | Stützstellenverteilung für Ladedruckregelung | 4x1 | 8 Bit | - | hPa | ? | - | 10.0 | 1.0 | 1.0 | 0.0 | 700.0 | 0x0 | 0x46 |
SPU08LDUB | 0x100d3 | Stützstellenverteilung für Ladedruckregelung | 8x1 | 8 Bit | - | hPa | ? | - | 5.0 | 1.0 | 1.0 | 600.0 | 1010.0 | 0x78 | 0xca |
DPUPS | 0x10da1 | Druckdifferenz für Umschaltung Referenzdruck vor Drosselklappe | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 300.0 | 300.0 | 0x1e | 0x1e |
HSLDSUA | 0x11121 | Hysterese für stationäre Schubumluftventilansteuerung | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 10.0 | 10.0 | 0x1 | 0x1 |
LDUVRS | 0x11123 | LDR Umluftventilsteuerung Reset vom Sollwert | 1x1 | 8 Bit | - | hPa | - | - | 10.0 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
SDLDSUA | 0x11125 | Schwelle für dynamische Schubumluftventilsteuerung aktiv | 16x1 | 8 Bit | - | hPa | hPa | - | 10.0 | 160.0 | 1.0 | 350.0 | 600.0 | 0x23 | 0x3c |
KFVPLGU | 0x11135 | Kennfeld für Grundladedruckverhältnis LDR | 8x8 | 8 Bit | - | - | hPa | U/min | 0.0078125 | 0.0390625 | 0.25 | 1.0 | 1.0 | 0x80 | 0x80 |
SPL08LDUW | 0x12b3e | Stützstellenverteilung für Ladedruckregelung | 8x1 | 16 Bit (LoHi) | - | hPa | ? | - | 0.0390625 | 1.0 | 1.0 | 250.0 | 1000.0 | 0x1900 | 0x6400 |
DSLGRAD | 0x13e4a | Gradient für Drucksensor Ladedruck | 1x1 | 16 Bit (LoHi) | - | hPa/V | - | - | 0.015625 | 1.0 | 1.0 | 541.0 | 541.0 | 0x8740 | 0x8740 |
DSLOFS | 0x13e4c | Offset Drucksensor Ladedruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | -16.40625 | -16.40625 | 0xfe5c | 0xfe5c |
PLSOLAP | 0x13fb4 | Applikationswert für Soll-Ladedruck | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
SPS08LDUW | 0x15762 | Stützstellenverteilung für Ladedruckregelung | 8x1 | 16 Bit (LoHi) | - | hPa | ? | - | 0.0390625 | 1.0 | 1.0 | 1.171875 | 9.375 | 0x1e | 0xf0 |
DPLSDWG | 0x1578b | Max. Delta plsol für Diagnose Waste- Gate | 8x1 | 16 Bit (LoHi) | - | hPa | Upm | - | 0.0390625 | 40.0 | 1.0 | 0.0 | 2320.0 | 0x0 | 0xe800 |
DPVDKDWG | 0x157a5 | Min. Delta Druck vor DK für Diagnose Waste- Gate | 8x1 | 16 Bit (LoHi) | - | hPa | Upm | - | 0.0390625 | 40.0 | 1.0 | 0.0 | 2320.0 | 0x0 | 0xe800 |
DSTGRAD | 0x168e0 | Gradient für Umrechnung Spannung -> Druck bei Tankdrucksensor | 1x1 | 16 Bit (LoHi) | - | hPa/V | - | - | 0.001953125 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
KLTDS | 0x168f2 | Konvertierungskennlinie für Tankdrucksensor DS-T2 | 6x1 | 16 Bit (LoHi) | - | hPa | hPa | - | 9.77E-4 | 0.00244140625 | 1.0 | -32.014336 | 32.013359 | 0x8000 | 0x7fff |
DPUBABMX | 0x1690c | Maximale Schwelle Delta Umgebungsdruck für Bergaberkennung | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 4.0234375 | 4.0234375 | 0x67 | 0x67 |
DPUFFMN | 0x1690e | Minimale Schwelle für Delta-Umgebungsdruck, Bergauferkennung (0.5 mm - Diagnose) | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | -4.0234375 | -4.0234375 | 0xff99 | 0xff99 |
DPUFFMX | 0x16910 | Maximale Schwelle für Delta-Umgebungsdruck, Bergaberkennung (0.5 mm - Diagnose) | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 4.0234375 | 4.0234375 | 0x67 | 0x67 |
DPUFVMN | 0x16912 | Spezifische Druckdifferenz für Saugrohrdrucküberwachung | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 150.0 | 150.0 | 0xf00 | 0xf00 |
DPUFVSMN | 0x16914 | Soll-Druckdifferenz für Saugrohrdrucküberwachung | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | -500.0 | -500.0 | 0xce00 | 0xce00 |
DIFFMAX | 0x16990 | max. zulässige Druckänderung während 100ms | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1.9921875 | 1.9921875 | 0x33 | 0x33 |
PUSMAX | 0x16992 | maximal plausible Umgebungsdruckschwelle | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 1150.0 | 1150.0 | 0x7300 | 0x7300 |
PUSMIN | 0x16994 | minimal plausible Umgebungsdruckschwelle | 1x1 | 16 Bit (LoHi) | - | hPa | - | - | 0.0390625 | 1.0 | 1.0 | 450.0 | 450.0 | 0x2d00 | 0x2d00 |
DPVLMS | 0x169a4 | Druckabfall am Luftfilter zur Berechnung Massestrom Tankentlüftung hinter Lader | 6x1 | 16 Bit (LoHi) | - | hPa | kg/h | - | 0.0390625 | 0.1 | 1.0 | 0.0 | 40.0 | 0x0 | 0x400 |
DPSLV | 0x18348 | minimale Druckdifferenz Sekundärluftventi | 1x1 | 8 Bit | - | hPa | - | - | 5.0 | 1.0 | 1.0 | 0.0 | 0.0 | 0x0 | 0x0 |
Legend:
- Bold: In original map pack
- Bold and italic: Added later
- Italic: Missing