Fuel injectors

Flow

Injector		Rated flow	2 bar	3 bar	3.5 bar	4 bar	5 bar	Spray pattern	Length	Connector
Siemens	S4	33#				349cc/33#	390cc/37#		55mm	EV1
Bosch	Bluetop	36#		380cc/36#		422cc/40#	490cc/47#
	RS4	46#				480cc/46#	538cc/51#	15° dual
	Greentop	42#		475cc/45#		550cc/52#	615cc/59#	15° single	2 1/2"
	Green Giant (Volvo)	42#		450cc/43#		520cc/50#	580cc/55#	15° dual	2 1/2"
Delphi		37#		391cc/37#		462cc/43#
		38#		399cc/38#		462cc/44#
		42#		441cc/42#		515cc/49#
		50#		525cc/50#		609cc/58#		22.4° wide
Siemens	Deka IV ('03 SRT4)	41#?		452cc/41#?		524cc/47#?		Dual?	55mm	EV6
	Deka IV ('04 SRT4)	45#		475cc/45#		546cc/52#		Dual?	55mm	EV6
	Deka ID (3172)	55#		599cc/57#				Narrow	2 1/2"	EV1
	Deka IV (1496)	60#	514cc/49#	630cc/60#		727cc/70#		30.0° wide	2 1/2"
Genesis		415cc		415cc/39#		483cc/46#		Dual	55mm
		430cc		430cc/41#		494cc/47#		Dual	55mm	EV6
		550cc		550cc/52#	580cc/55#	635cc/60#		Dual	55mm	EV6

	Shape	Bosch	Comment
EV1	Rectangle	Design II	Minitimer
EV6	Oval	Design III	USCAR

Injectors are male, harness is female.

USCARR to Bosch fuel injector adaptors

Note that 2 1/2" injectors require spacing the fuel rail.

1 lb/hr gasoline = 10.5 cc/min (@720 kg/m³) (1 (pound / hr)) / (720 (kg / (m^3)))
$Flow_{new}={\sqrt {\frac {P_{new}}{P_{old}}}}Flow_{old}$
Density of typical test fluid = 760 - 770 kg/m³
1 lb/hr = 9.81 - 9.95 cc/min
Density of n-heptane = 685 kg/m³
1 lb/hr = 11.0 cc/min
3 bar = 43.5 psi
4 bar = 58.0 psi
5 bar = 72.5 psi
RC Engineering's online calculator