Knock control: Difference between revisions

Revision as of 00:08, 27 May 2008

There are two kinds of knock control.

Long term adjustments that go into correction factors. ECU applies these to ignition timing across the board to all cylinders based on knock sensor activity that indicates long term knock sensitivity (such as octane).
Short term adjustments to timing that the ECU applies on a per cylinder basis. The ECU applies these individually to each cylinder as necessary based on knock sensor activity that indicates an unexpected knock event (such as detonation and/or pre-ignition).

@@ Line 1: / Line 1: @@
 There are two kinds of knock control.
-Long term adjustments that go into [[correction factors]]. ECU applies these to ignition [[timing]] across the board to all cylinders based on [[knock sensor]] activity that indicates long term knock sensitivity (such as octane).
+# Long term adjustments that go into [[correction factors]]. ECU applies these to ignition [[timing]] across the board to all cylinders based on [[knock sensor]] activity that indicates long term knock sensitivity (such as octane).
+# Short term adjustments to [[timing]] that the ECU applies on a per cylinder basis. The ECU applies these individually to each cylinder as necessary based on knock sensor activity that indicates an unexpected knock event (such as [[detonation]] and/or [[pre-ignition]]).
-Short term adjustments to [[timing]] that the ECU applies on a per cylinder basis. The ECU applies these individually to each cylinder as necessary based on knock sensor activity that indicates an unexpected knock event (such as [[detonation]] and/or [[pre-ignition]]).