Bosch ME7.1: Difference between revisions

Revision as of 09:51, 27 December 2007

The ECU appears to use two 32bit Infineon C16x CPUs. Non-volatile code/data is stored on a single 16bit AM29F800BB 44 pin PSOP

Block diagram of the torque based system's control flow:

Revision as of 21:03, 3 September 2006 (view source) Nyet (talk \| contribs) (→‎References) ← Older edit		Revision as of 09:51, 27 December 2007 (view source) Nyet (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	The ECU appears to use (two?) 32bit ~~Siemens~~ C16x ~~based~~ CPUs.		The ECU appears to use two 32bit Infineon C16x CPUs. Non-volatile code/data is stored on a single 16bit AM29F800BB 44 pin PSOP

	Block diagram of the torque based system's control flow:		Block diagram of the torque based system's control flow: