Fuel injectors: Difference between revisions
(→Flow) |
(→Flow) |
||
Line 25: | Line 25: | ||
| 0 280 158 040 ||980cc@3bar || ||'''980cc/93#'''|| || 1031cc/108#|| || 30° || single || 0° || rowspan="2"|37mm || Jetronic |
| 0 280 158 040 ||980cc@3bar || ||'''980cc/93#'''|| || 1031cc/108#|| || 30° || single || 0° || rowspan="2"|37mm || Jetronic |
||
|- |
|- |
||
| B 280 436 469-01 (Motorsport)||1019cc@3bar || ||'''1019cc/97#'''|| || 1176cc/112#|| || 20° || dual 7° || 5°? || Jetronic |
| B 280 436 469-01 (Motorsport)||1019cc@3bar || ||'''1019cc/97#'''|| || 1176cc/112#|| || 20° || dual 7° || 5°? || Jetronic, 0° &dleta; |
||
|- |
|- |
||
| rowspan="4" colspan="3" | Delphi ||37#@3bar || ||'''391cc/37#'''|| || 462cc/43# || || rowspan="3"| ? || rowspan="4"| ? || rowspan="11"| 0° || rowspan="4"| ? || rowspan="4" | Jetronic |
| rowspan="4" colspan="3" | Delphi ||37#@3bar || ||'''391cc/37#'''|| || 462cc/43# || || rowspan="3"| ? || rowspan="4"| ? || rowspan="11"| 0° || rowspan="4"| ? || rowspan="4" | Jetronic |
Revision as of 18:29, 16 November 2014
Flow
Injector | Rated flow | 2 bar | 3 bar | 3.5 bar | 4 bar | 5 bar | Cone | Pattern | Bend (γ) | Length | Connector | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Siemens | Deka | S4 | 33#@4bar | 349cc/33# | 390cc/37# | 21° | dual 15° | 13° | 52mm | Jetronic | |||
RS4 078 133 551 BJ | 46#@4bar | 480cc/46# | 538cc/51# | 37mm | |||||||||
Bosch | Bluetop | 36#@3bar | 309cc/29# | 380cc/36# | 422cc/40# | 490cc/47# | ? | ? | 0° | ? | |||
Greentop | 42#@3bar | 475cc/45# | 550cc/52# | 615cc/59# | 15° | single | 64mm | ||||||
Green Giant (Volvo) | 42#@3bar | 450cc/43# | 520cc/50# | 560cc/55# | 15° | dual | |||||||
EV14 | 0 280 158 117 | 532cc@2.7bar | 550cc/52# | 635cc/60# | 15° | dual 7° | 12° | 52mm | USCAR | ||||
0 280 158 117 (modified?) | 750cc@3bar | 750cc/72# | 865cc/82# | ||||||||||
0 280 158 123 (997 turbo, GT3RS) | 627cc@3bar | 627cc/60# | 724cc/69# | 809cc/77# | 25° | dual 7° | 0° | Jetronic | |||||
0 280 158 298 (Ford DR3Z-9F593-A) | 55#@39.1psi | 627cc/60# | 724cc/69# | 809cc/77# | 15° | dual 7° | 13°? | USCAR | |||||
0 280 158 040 | 980cc@3bar | 980cc/93# | 1031cc/108# | 30° | single | 0° | 37mm | Jetronic | |||||
B 280 436 469-01 (Motorsport) | 1019cc@3bar | 1019cc/97# | 1176cc/112# | 20° | dual 7° | 5°? | Jetronic, 0° &dleta; | ||||||
Delphi | 37#@3bar | 391cc/37# | 462cc/43# | ? | ? | 0° | ? | Jetronic | |||||
38#@3bar | 399cc/38# | 462cc/44# | |||||||||||
42#@3bar | 441cc/42# | 515cc/49# | |||||||||||
50#@3bar | 525cc/50# | 609cc/58# | 22.4° | ||||||||||
Siemens | Deka | IV ('03 SRT4) | 41#?@3bar | 452cc/41#? | 524cc/47#? | ? | dual? | 52mm | USCAR | ||||
IV ('04 SRT4) | 45#@3bar | 475cc/45# | 546cc/52# | ? | dual? | ||||||||
ID (3172) | 55#@3bar | 472cc/45# | 600cc/57# | 624cc/59.5# | 667cc/63.5# | 746cc/71# | 15° | single | 64mm | Jetronic | |||
IV (1496) | 60#@3bar | 514cc/49# | 630cc/60# | 727cc/70# | 30.0° | ||||||||
Genesis | 415cc@3bar | 415cc/39# | 483cc/46# | ? | dual | 52mm | |||||||
430cc@3bar | 430cc/41# | 494cc/47# | ? | USCAR | |||||||||
550cc@3bar | 550cc/52# | 580cc/55# | 635cc/60# |
- Bold denotes the rated flow/pressure.
- Cone angle is Bosch 'α50' for dual cone, 'α80' for single cone.
- Pattern angle for dual cone is Bosch 'β'
- Bend angle is Bosch 'γ'
- Length is o-ring center to center.
Stock injectors are dual cone and have non-zero γ (cant)! Also, when using injectors with non-zero γ, their orientation is critical for proper atomization..
Spacers
2 1/2" (64mm) injectors require 12mm (7/16") rail spacers when using the S4 intake manifold and fuel rail. If you are using an RS4 fuel rail you will need a 1" spacer! 1 1/2" (37mm) injectors require 15mm (9/16") injector spacers with the S4 fuel rail.
mm | inches | Bosch (not c-to-c) | S4 injector spacer | S4 rail spacer | RS4 rail spacer |
---|---|---|---|---|---|
37mm | 1 1/2" | 33.60mm | 15mm (9/16") | N/A | none |
52mm | 2 1/16" | 48.65mm | none | none | 15mm (9/16") |
64mm | 2 1/2" | 60.65mm | N/A | 12mm (7/16") | 27mm (1") |
Note that Bosch's EV14 length specs are not o-ring center to center
Adaptors
Connector | Shape | Bosch | A.K.A. |
---|---|---|---|
Jetronic | Rectangle | Design II/EV1 | Minitimer |
USCAR | Oval | Design III/EV6/EV14 |
Injectors are male, harness is female, so to use a USCAR/EV6/EV14 injector on a Minitimer/Jetronic/EV1 car, you need a USCAR (female) to Jetronic (male) adapter.[1][2]
Conversions
lb/hr to cc/min
- 1 lb/hr gasoline = 10.5 cc/min (@720 kg/m3) - (1 (pound / hr)) / (720 (kg / (m^3)) )
- 1 cc/min gasoline = 0.72 cc/min
Flow dependency on pressure
- 3 bar = 43.5 psi
- 4 bar = 58.0 psi
- 5 bar = 72.5 psi
- RC Engineering's online calculator
Common test fluids
- Density of typical test fluid = 760 - 770 kg/m3
- 1 lb/hr = 9.81 - 9.95 cc/min
- Density of n-heptane = 685 kg/m3
- 1 lb/hr = 11.0 cc/min
- 1 cc/min = 0.685 g/min
Instrument cluster
If you change fuel injectors, your instrument cluster will estimate your fuel consumption incorrectly. Use VAG-COM to adjust it by going to Instrument cluster (17) -> Adaptation (10) -> Channel (03).[3]
Unfortunately, you can only set it to a maximum of 115%. Default is 100%.
If you have access to ME7.x tuning tools, you can completely fix cluster consumption by adjusting the KVB 1x1.
References
- http://www.bosch-motorsport.de/media/catalog_resources/Injection_Valve_EV_14_Datasheet_51_en_2775993867pdf.pdf - Bosch EV14 data sheet
- http://usrallyteam.com/injectors.html - Genesis
- http://racetronix.com/ - Delphi and Siemens
- http://www.synerject.com/fuelinjectors-dekaIV.html - Custom Siemens Dekas
- http://www.fiveomotorsport.com/Injector_SetsMODS.asp - All others
- http://www.srtforums.com/forums/showthread.php?t=99710 - SRT4
- http://forums.audiworld.com/s4/msgs/2091797.phtml - Flow comparison vs. stock.
- http://www.rceng.com/ - RC Engineering
- Bosch injector specifications
- http://forums.quattroworld.com/s4/msgs/183984.phtml - Latency and EV14 PDF.