Motronic abbreviations: Difference between revisions

From S4wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(9 intermediate revisions by 2 users not shown)
Line 4: Line 4:
;B_ldob - LadeDruck OverBoost: 1 - overboost enable (dynamic driving, use KFVPDKSD), 0 - overboost disable (steady driving, use KFVPDKSE)
;B_ldob - LadeDruck OverBoost: 1 - overboost enable (dynamic driving, use KFVPDKSD), 0 - overboost disable (steady driving, use KFVPDKSE)
;B_ldobsp: Post overboost lock-out bit (force overboost enable - ignore steady driving resumption)
;B_ldobsp: Post overboost lock-out bit (force overboost enable - ignore steady driving resumption)
;[[CW_NOROMCHKRESET]]: disables running checksums - not startup
;[[CW_NOZYKLROMCHK]]: disable cyclic rom monitor checksums
;DIA: Diagnosis
;DIA: Diagnosis
;DK - DrosselKlappen: Throttle plate
;DK - DrosselKlappen: Throttle plate
Line 13: Line 15:
;evtmod - EinspritzVentil Temperature (mod=Model?): Estimated fuel injector temperature
;evtmod - EinspritzVentil Temperature (mod=Model?): Estimated fuel injector temperature
;FGR - FahrGeschwindigkeitsRegler: Cruise control
;FGR - FahrGeschwindigkeitsRegler: Cruise control
;fkmsdk: Multiplicative correction quantity
;fkmsdk: Multiplicative correction quantity for determining pvdk (pressure upstream of throttle plate) from measured ambient air pressure (pvdkds)
;fpvdk: pvdk/1013 hPa (correction factor for adjusting the air mass flow at standard pressure upstream from throttle valve to instantaneous conditions)
;fpvdk: pvdk/1013 hPa (correction factor for adjusting the air mass flow at standard pressure upstream from throttle valve to instantaneous conditions)
;ftbr: ???
;ftvdk: Intake air temperature compensation factor for converting the standard air mass flow to an air mass flow at an instantaneous temperature
;ftvdk: Intake air temperature compensation factor for converting the standard air mass flow to an air mass flow at an instantaneous temperature
;furl?
;furl, fupsrl - Faktor Umrechnungs von ps->rl: rlsol/pssol (conversion factor for converting the intake manifold pressure to a relative charge in % per hPa)
;fupsrl - Faktor Umrechnungs von ps->rl: rlsol/pssol (conversion factor for converting the intake manifold pressure to a relative charge in % per hPa)
;KLAF: Outflow characteristic for adjusting the standard flow measured at an above-critical rate of flow to below-critical rates of flow
;KLAF: Outflow characteristic for adjusting the standard flow measured at an above-critical rate of flow to below-critical rates of flow
;KUMSRL: Parameter for determining the relative cylinder charge from the air mass flow, the engine speed, and the piston-swept volume
;KUMSRL: Parameter for determining the relative cylinder charge from the air mass flow, the engine speed, and the piston-swept volume
;lde - LadeDruckError: plsol-plist (boost deviation - feedback input to the LDRPID)
;lde - LadeDruckError: pssol-ps or plsol-plist (boost deviation - feedback input to the LDRPID)
;LDR - LadeDruckRegelung: Boost pressure regulation
;LDR - LadeDruckRegelung: Boost pressure regulation
;ldtv - LadeDruckTastverhältnis: Wastegate duty cycle
;ldtv - LadeDruckTastverhältnis: Wastegate duty cycle
;LL - Leerlauf: Idle
;Md: misfire detection?
;Md: misfire detection?
;nmot: Engine speed (RPM)
;nmot: Engine speed (RPM)
Line 29: Line 34:
;rlsol: Requested load (which is capped by engine load corrected specified)
;rlsol: Requested load (which is capped by engine load corrected specified)
;rk - Relativ Kraftstoffmasse: Relative fuel mass
;rk - Relativ Kraftstoffmasse: Relative fuel mass
;prg?
;pirg: Correction of the intake manifold pressure by exhaust gas recirculation, partial pressure of internal exaust gas recirculation
;pirg: Correction of the intake manifold pressure by exhaust gas recirculation, partial pressure of internal exaust gas recirculation
;plg - Pressure Ladedruck Grund: reference pressure for vpssplg ratio
;plg - Pressure Ladedruck Grund: reference pressure for vpssplg ratio
;plist: actual boost pressure upstream of throttle plate
;plist: Actual boost pressure upstream of throttle plate
;plsol: pssol/vpsspls (requested boost pressure upstream of throttle plate). When vpsspls is lower (e.g. during "dynamic driving"), plsol will be higher (overboost). When vpsspls is higher (e.g. during "steady driving"), plsol will be lower (no overboost).
;plsol: pssol/vpsspls (requested boost pressure upstream of throttle plate). When vpsspls is lower (e.g. during "dynamic driving"), plsol will be higher (overboost). When vpsspls is higher (e.g. during "steady driving"), plsol will be lower (no overboost).
;ps: Actual intake manifold pressure
;ps: Actual intake manifold pressure
;pssol: rlsol/fupsrl (requested intake manifold pressure downstream of throttle plate)
;pssol: rlsol/fupsrl (requested intake manifold pressure downstream of throttle plate)
;pvdk: pvdkds * fkmsdk (pressure upstream up the throttle plate)
;pspvdk: ps/pvdk (pressure ratio of the pressure drop over the throttle plate)
;pvdk: pvdkds * fkmsdk (pressure upstream of the throttle plate)
;pvdkds: Ambient pressure measured by a pressure sensor
;pu - Umgebungsdruck: Ambient pressure
;pu - Umgebungsdruck: Ambient pressure
;Tans - Temperatur ansaugluft: Intake air temperature
;Tans - Temperatur ansaugluft: Intake air temperature
Line 42: Line 50:
;te - Einspritzzeit/dauerung effektiv: Effective injector on time
;te - Einspritzzeit/dauerung effektiv: Effective injector on time
;ti - Einspritzzeit/dauerung: Injector on time (actual)
;ti - Einspritzzeit/dauerung: Injector on time (actual)
;VA?
;Verhältnis: ratio
;Verhältnis: ratio
;vpssplg - Grundladedruckverhältnis: pssol/plg? (pressure ratio between requested intake manifold downstream of throttle plate and reference pressure?)
;vpssplg - Grundladedruckverhältnis: pssol/plg? (pressure ratio between requested intake manifold downstream of throttle plate and reference pressure?)

Latest revision as of 08:01, 6 December 2022

In general, all lowercase acronyms are calculated values; maps and other acronyms are typically all caps.

ASR - AntiSlipRegelung
Anti slip control
B_ldob - LadeDruck OverBoost
1 - overboost enable (dynamic driving, use KFVPDKSD), 0 - overboost disable (steady driving, use KFVPDKSE)
B_ldobsp
Post overboost lock-out bit (force overboost enable - ignore steady driving resumption)
CW_NOROMCHKRESET
disables running checksums - not startup
CW_NOZYKLROMCHK
disable cyclic rom monitor checksums
DIA
Diagnosis
DK - DrosselKlappen
Throttle plate
DKW - DrossellKlappenWinkel
Throttle plate angle
DLR - DeltaLambdaRegelung
Delta lambda regulation
DMD - Delta Moment Dashpotende
?
DMD
Diagnose Misfire Detection
DV-E - ?
Wastegate
evtmod - EinspritzVentil Temperature (mod=Model?)
Estimated fuel injector temperature
FGR - FahrGeschwindigkeitsRegler
Cruise control
fkmsdk
Multiplicative correction quantity for determining pvdk (pressure upstream of throttle plate) from measured ambient air pressure (pvdkds)
fpvdk
pvdk/1013 hPa (correction factor for adjusting the air mass flow at standard pressure upstream from throttle valve to instantaneous conditions)
ftbr
???
ftvdk
Intake air temperature compensation factor for converting the standard air mass flow to an air mass flow at an instantaneous temperature
furl?
fupsrl - Faktor Umrechnungs von ps->rl
rlsol/pssol (conversion factor for converting the intake manifold pressure to a relative charge in % per hPa)
KLAF
Outflow characteristic for adjusting the standard flow measured at an above-critical rate of flow to below-critical rates of flow
KUMSRL
Parameter for determining the relative cylinder charge from the air mass flow, the engine speed, and the piston-swept volume
lde - LadeDruckError
pssol-ps or plsol-plist (boost deviation - feedback input to the LDRPID)
LDR - LadeDruckRegelung
Boost pressure regulation
ldtv - LadeDruckTastverhältnis
Wastegate duty cycle
LL - Leerlauf
Idle
Md
misfire detection?
nmot
Engine speed (RPM)
NWS - KnockWelleSteuerung
Cam shaft control
RLFS - Relativ LuftFüllung Steuerung?
Relative air charge control?
rlroh
Air mass flowing into the intake manifold, uncorrected relative charge of a cylinder
rlsol
Requested load (which is capped by engine load corrected specified)
rk - Relativ Kraftstoffmasse
Relative fuel mass
prg?
pirg
Correction of the intake manifold pressure by exhaust gas recirculation, partial pressure of internal exaust gas recirculation
plg - Pressure Ladedruck Grund
reference pressure for vpssplg ratio
plist
Actual boost pressure upstream of throttle plate
plsol
pssol/vpsspls (requested boost pressure upstream of throttle plate). When vpsspls is lower (e.g. during "dynamic driving"), plsol will be higher (overboost). When vpsspls is higher (e.g. during "steady driving"), plsol will be lower (no overboost).
ps
Actual intake manifold pressure
pssol
rlsol/fupsrl (requested intake manifold pressure downstream of throttle plate)
pspvdk
ps/pvdk (pressure ratio of the pressure drop over the throttle plate)
pvdk
pvdkds * fkmsdk (pressure upstream of the throttle plate)
pvdkds
Ambient pressure measured by a pressure sensor
pu - Umgebungsdruck
Ambient pressure
Tans - Temperatur ansaugluft
Intake air temperature
Tmot - Temperatur motor
Motor (coolant) temperature
TV - Tastverhältnis
Duty cycle
te - Einspritzzeit/dauerung effektiv
Effective injector on time
ti - Einspritzzeit/dauerung
Injector on time (actual)
VA?
Verhältnis
ratio
vpssplg - Grundladedruckverhältnis
pssol/plg? (pressure ratio between requested intake manifold downstream of throttle plate and reference pressure?)
vpsspls
pssol/plsol (pressure ratio across throttle plate)
vpsspu
pssol/pu (ratio of requested intake air pressure downstream of throttle plate to ambient air pressure)