Open loop: Difference between revisions
Jump to navigation
Jump to search
(New page: Open loop fueling is used in cars equipped with narrow band O2 sensors to determine the injector on time w/o using feedback from the sensors. Generally, it is based on the amount of air me...) |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
Open loop fueling is used in cars equipped with narrow band O2 sensors to determine the injector on time w/o using feedback from the sensors. Generally, it is based on the amount of air metered by the [[ |
Open loop fueling is used in cars equipped with narrow band O2 sensors to determine the injector on time w/o using feedback from the sensors. Generally, it is based on the amount of air metered by the [[mass air flow]] sensor, and whether the desired AFR is stoichiometric (lambda=1) or not. |
||
Motronic will go open loop under any of the following conditions |
Motronic will go open loop under ''any'' of the following conditions |
||
* At motor start |
|||
* When load > RLLRUN + TRAB delay time |
|||
* When req lambda != 1 |
|||
Note that there are other open loop conditions, such as during idle under certain circumstances, and at fuel-cutoff during overrun. |
Note that there are other open loop conditions, such as during idle under certain circumstances, and at fuel-cutoff during overrun. |
||
Latest revision as of 20:00, 29 December 2009
Open loop fueling is used in cars equipped with narrow band O2 sensors to determine the injector on time w/o using feedback from the sensors. Generally, it is based on the amount of air metered by the mass air flow sensor, and whether the desired AFR is stoichiometric (lambda=1) or not.
Motronic will go open loop under any of the following conditions
- At motor start
- When load > RLLRUN + TRAB delay time
- When req lambda != 1
Note that there are other open loop conditions, such as during idle under certain circumstances, and at fuel-cutoff during overrun.