AWE backlit shift knob

From S4wiki
Revision as of 23:59, 1 September 2006 by Nyet (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

01.jpg

Obtain ChapStick®, remove wax, knob, and thread onto lever.

02.jpg

ChapStick® inside knob, Cut ChapStick® barrel to size, so it is short enough to clear set screws

03.jpg

04.jpg

Notched top boot spacer.

05.jpg

Knob + chrome trim ring + top boot spacer.

06.jpg

Notched bottom boot spacer, also trimmed by 1" or more, screwed into top boot spacer (view with boot inside out from below).

07.jpg

Notched top boot spacer screwed into bottom boot spacer (outseide view of boot).

08.jpg

Check ChapStick® spacer fitment (note: tape included with knob) remove BEFORE going any further..

09.jpg

Boot on shift lever, chapstick added last.

10.jpg

Slide knob over chapstick. Install set screws + blue loctite, thread chrome trim piece.

11.jpg

12.jpg

Final product! Note zero gap between chrome trim piece and top boot spacer.