Knock control: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
There are two kinds of knock control. |
There are two kinds of knock control that are a response to [[knock recognition]]. |
||
# Long term adjustments that go into [[correction factors]]. ECU applies these to ignition [[timing]] across the board to all cylinders based on [[knock sensor]] activity that indicates long term knock probability (such as variations in octane). |
# Long term adjustments that go into [[correction factors]]. ECU applies these to ignition [[timing]] across the board to all cylinders based on [[knock sensor]] activity that indicates long term knock probability (such as variations in octane). |
Latest revision as of 23:05, 14 March 2011
There are two kinds of knock control that are a response to knock recognition.
- Long term adjustments that go into correction factors. ECU applies these to ignition timing across the board to all cylinders based on knock sensor activity that indicates long term knock probability (such as variations in octane).
- Short term adjustments to timing that the ECU applies on a per cylinder basis. The ECU applies these individually to each cylinder as necessary based on knock sensor activity that indicates an unexpected knock event (such as detonation and/or pre-ignition).